Canon MVX25i User Manual

131
Direct Printing
E
Trimming Settings
Set the print style before you start with the trimming settings.
1. In the print setting menu, turn the SET dial to select
[TRIMMING] and press the SET dial.
The trimming frame appears.
2. Change the size of the trimming frame.
•Move the zoom lever toward T to shrink the frame, and
toward W to enlarge the frame.
•To cancel the trimming settings, move the zoom lever toward
W until the trimming frame disappears.
3. Move the trimming frame.
•Turn the SET dial to move the frame. Press the SET dial to
switch between the directions (up/down or right/left) and the
orientation of the frame (vertical/horizontal).
•Pressing the MENU button brings you back to the print
settings menu.
❍ About the color of the trimming frame (Canon CP-Printers only):
-White: No trimming settings.
-Green: Recommended trimming size. (The trimming frame may not appear
in green depending on the image size, paper size or borders settings.)
- Red: The image is magnified beyond recommended size. The image may
print out coarsely.
❍ The trimming setting applies only to one image.
❍ The trimming setting is cancelled with the following operations:
-When you turn off the camcorder.
- When you disconnect the interface cable.
- When you expand the trimming frame beyond its maximum size.
W
T
T

Canon MVX25i Specifications

General

Brand	Canon
Model	MVX25i
Category	Camcorder
Language	English