Chapter 8
Chapter 8 65
Changing The Machine Settings (MP170)
Changing The Machine Settings (MP170)
Changing The Settings
This section describes the procedure to change the settings in the <SYSTEM SETTINGS> menu,
taking the steps to specify <EXTENDED AMOUNT> as an example.
1 Press [ON/OFF] to turn ON the machine. (See page 14)
2 Press [Menu] repeatedly until <SYSTEM SETTINGS> appears.
3 Use [ ] or [ ] to select <PRINT SETTINGS>, then press [OK].
4 Use [ ] or [ ] to select <EXTENDED AMOUNT>, then press [OK].
5 Use [ ] or [ ] to select <SMALL> or <LARGE>, then press [OK].
PRINT SETTINGS
QUIET MODE
Use this function if you want to reduce the operation noise, such as when printing at night: ON/
OFF
EXTENDED AMOUNT
Selects the amount of image that extends off the paper when printing in borderless: SMALL/
LARGE
Note
Depending on the functions you use, some setting items cannot be
specified in combination.
Important
z The printing speed may be reduced compared to when this setting is
set to <OFF>.
z This function may not be so effective depending on the Image Quality
setting.
z Certain noise, such as when the machine is preparing for printing, is
not reduced.
EXT E NDED A MOUNT
SMAL L
X
To Next Page
Loading...
Need help?
General