Chapter 9 85
Routine Maintenance
z Cleaning The Bottom Plate
1 Proceed steps 1 to 3 for MP170 on page 84.
2 Press [Maintenance] repeatedly until <J> appears.
3 Press [OK].
Inspect the discharged paper. If dust or dirt can be seen on the paper, repeat the cleaning
process.
Cleaning The Protrusions Inside The Machine
If protrusions inside the machine are stained, wipe ink off the protrusions using a swab or
something similar.
Note
z If the discharged paper still appears dirty after you have run this clean
process, the inside of your machine is probably extremely dirty.
z Clean the inside of the machine in accordance with the following directions.
z See “Cleaning The Protrusions Inside The Machine” on page 85.
Important
Before cleaning, be sure to turn OFF the machine.
Caution
Do not touch the transparent film (A), film cable (B), ink absorber (sponge
part) (C), or any metal parts.
(A) (B) (C)
To Next Page
Loading...
Need help?
General