Reset setting
Select this menu from Device settings in Setup menu.
Returns all settings you made to the printer back to the default. However, some data may not be changed,
depending on the current usage state of your printer.
Important
• Depending on the setting item, it is necessary to perform connection or setup again after you have
returned the setting back to the default.
• Web service setup
Returns the Web service settings back to the default.
• LAN settings
Returns the LAN settings back to the default.
• Telephone no. data
Returns the telephone/fax number settings to default.
• Setting data
Returns the settings such as the paper size, media type, or other setting items other than the LAN
settings or the fax settings back to the default.
• FAX settings
Returns the fax settings back to the default. Disconnect the telephone line from the printer before you
return this setting item back to the default.
After resetting, perform setup again as necessary.
• All data
Sets all settings you made to the printer back to the default. The administrator password specified by
Remote UI or IJ Network Device Setup Utility reverts to the default setting.
After resetting, perform setup again as necessary.
Note
• You cannot set the following setting items back to the default:
• The language displayed on the LCD
• The current position of the print head
• CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
• The country or region selected for Country or region
You can delete the registered user's name or telephone number following the procedure below.
1. Displays Unit TEL no. registr. or Displays Unit name registr..
Setting Sender Information
2. Delete all the numbers and the letters by pressing the Back button.
204
To Next Page
Loading...
Need help?
General
