Canon PowerShot SX70 HS User Manual

z Controlling the Camera from a Smartphone
You can control the camera by using a smartphone paired via Bluetooth as
a remote control.
1
Start Camera Connect.
z If connected via Wi-Fi, end the
connection.
2
Touch [Bluetooth remote controller].
z Geotagging Images as You Shoot
Your shots can be geotagged using GPS information (such as latitude,
longitude, and elevation) from a smartphone paired via Bluetooth. On the
playback screen, you can check the location information added to your shots.
On the smartphone, activate location services.
1
Start Camera Connect.
z If connected via Wi-Fi, end the
connection.
2
[GPS settings]
3
[GPS via mobile] → [Enable]
4
Shoot.
z Before shooting, conrm that [ ] and
[
] icons are shown on the camera.
z Your shots are now geotagged.
z From now on, shots you take with
Camera Connect running will be
geotagged.
166

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)