Canon PowerShot SX70 HS User Manual

Tracking AF
z [AF operation] is set to [ ] and cannot be changed.
z Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
z [
] is not available.
z To set to [
], press the button and choose [ ].

Moving the AF Point
z You can also return the AF point to the original position in the center by
holding down the
button.
z Changing the IS Mode Settings
z The [IS mode] setting changes to [On] for movie recording, even if
[Shoot only] is set.
z If image stabilization cannot prevent camera shake, mount the camera
on a tripod or take other measures to hold it still. Additionally, you
should set [IS mode] to [Off] when using a tripod or other means to
secure the camera.
z Using Digital Tele-Converter
z The shutter speed at maximum telephoto (when you move the zoom
lever or zoom button all the way toward
) may match the speed when
zooming in to enlarge subjects with digital zoom.
z Storing the Zoom or MF Position
z By choosing [Recall zoom/MF settings] → [MF memory] → [On]
before manually focusing, you can retain the manual focus status for
the next time you turn on the camera.
z In
/ mode, the camera returns to the zoom position where
settings were registered.
251

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)