Canon PowerShot SX70 HS User Manual

z The le extension for JPEG images is .JPG, and the extension for
RAW images is .CR3. File names of JPEG and RAW images captured
together have the same image number.
z You can also congure this setting in
[Image quality]. To capture
images in both JPEG and RAW format simultaneously, choose [
]
or [
] in [RAW].
z Only JPEG images are captured when [RAW] is set to [−] on the
[Image quality] screen, and only RAW images are captured when
[JPEG] is set to [−].
z Changing the Flash Mode
z If the ash res, vignetting may occur.
z In [
] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should set
[IS mode] to [Off] when using a tripod or other means to secure the
camera.
z In [
] mode, even after the ash res, ensure that the main subject
does not move until the shutter sound is nished playing.
z Locking Brightness / Exposure in Flash
Photography (FE Lock)
z FE: Flash Exposure
z [
] blinks when standard exposure is not possible, even if you press
the
button to re the ash. Enable FE lock by pressing the button
when subjects are within ash range.
z Configuring Flash Settings
z You can also access the [Flash settings] screen by pressing the
button and immediately pressing the
button.
246

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)