Canon PowerShot SX70 HS User Manual

Sending Images to a Computer
Automatically
Images on the camera can be automatically sent to a computer connected
to an access point (also set up for camera Wi-Fi connections) when the
camera is within range, as when you bring the camera home after shooting.
Connecting via Wi-Fi
1
Connect the computer to the access
point.
z Install Image Transfer Utility 2 on the
computer.
2
Start Image Transfer Utility 2.
3
In Image Transfer Utility 2, access
the pairing settings screen.
z The screen to set up pairing is shown
when you follow the instructions
displayed the rst time Image Transfer
Utility 2 starts up.
4
[Wireless communication
settings] → [Wi-Fi settings]
171

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)