Canon PowerShot SX70 HS User Manual

z Adding a Date Stamp
z Shots taken without adding a date stamp can be printed with one as
follows.
However, adding a date stamp this way to images that already have
one may cause it to be printed twice.
- Print using printer functions
- Use camera DPOF print settings to print
z Adjusting Image Brightness (Exposure
Compensation)

Auto Exposure Bracketing (AEB Shooting)
z To clear the AEB setting, set the AEB amount to 0, following the
conguration procedure.
z AEB shooting is available only in
/ / / / / modes without
using the ash.
z If exposure compensation is already in use, the value specied for that
function is treated as the standard exposure level for AEB.
z Changing the ISO Speed
z Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some
shooting conditions.
z Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and enable sufcient ash
illumination for subjects farther away. However, shots may look grainy.
248

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)