z Shooting at Specific Shutter Speeds (Tv Mode)
z : Time value
z We recommend deactivating image stabilization when shooting at slow
shutter speeds on a tripod.
z With shutter speeds of 1.3 seconds or slower, ISO speed is [100] and
cannot be changed.
z Blinking display of the aperture value when you press the shutter button
halfway indicates that the standard exposure has not been obtained.
Adjust the shutter speed until the aperture value is displayed in white.
z Shooting at Specific Aperture Values (Av Mode)
z : Aperture value (size of the opening made by the diaphragm in the
lens)
z Blinking display of the shutter speed when you press the shutter button
halfway indicates that the standard exposure has not been obtained.
Adjust the aperture value until the shutter speed is displayed in white.
z Shooting at Specific Shutter Speeds and
Aperture Values (M Mode)
z : Manual
z When the ISO speed is îš¿xed, you can compare your speciîš¿ed value
(where the exposure level indicator moves) to the standard exposure
level by pressing the shutter button halfway. The exposure level
indicator appears as [
] or [ ] when the difference from standard
exposure exceeds 3 stops.
z After you set the shutter speed and aperture value, the exposure level
indicator may change if you adjust the zoom or recompose the shot.
z When the ISO speed is îš¿xed, screen brightness may change depending
on your speciîš¿ed shutter speed and aperture value. However, screen
brightness remains the same when the ash is up and the mode is set
to [
].
241
To Next Page
Loading...
Need help?
General
