Canon PowerShot SX70 HS User Manual

z Establishing a Connection via an Access Point
The camera can connect to an access point that a printer is connected to, to
print via the access point.
Connect the devices near the access point, because you will need to press
the WPS button.
1
In step 4 of “Connecting to Printers
via Wi-Fi” (
=
167), choose [Switch
network].
2
[Connect with WPS]
3
[WPS (PBC mode)] → [OK]
4
Press the WPS button on the access
point.
169

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)