Canon PowerShot SX70 HS User Manual

z Using a Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the ash, attach
optional Lens Hood LH-DC90 (sold separately) to prevent light outside the
angle of view from entering the lens.
1
Attach the lens hood.
z Make sure the camera is off.
z Align the lens hood mark (2) with the
camera mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
z To remove the lens hood, turn it in the
opposite direction.
z To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the camera
mark (1), and turn the lens hood in the
direction of the arrow until it locks in
place.
(
2
)
(
1
)
(
2
)
(
1
)
222

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)