Canton Smart Connect 5.1 User Manual

3
81
English
Unpacking
Unpack the Connect 5.1 carefully and check that all the following
parts are present:
Delivery content
• 1x Smart Connect 5.1
• 1x Power cord
• 1x Short manual
Setting up the remote control
(optionally available)
The remote control comes with a
battery already installed. Simply
remove the protective film to
activate. When replacing the
battery ensure that it is correctly
inserted according to the polarity
markings (+/–).
Only use the battery specified for
this system (CR 2032).
CR 2032
OPEN CLOSE
In this chapter we will show you the connection terminals
and how to operate the Connect 5.1 using the optionally
available remote control.
Place the Smart Connect 5.1 in the desired location and
connect it to the power input using the power cord. Make
sure that your TV is plugged in. If you want to connect
your Connect to the WiFi network, please make sure your
WiFi router is active and has a connection to the Internet.
Connection

Canton Smart Connect 5.1 Specifications

General

Control type	Touch
Product color	Black
Audio decoders	DTS, Dolby Digital
Built-in display	Yes
Bluetooth version	4.0
Display technology	LED
Cables included	AC
Power consumption (economy mode)	0.46 W
HDMI input ports quantity	3
HDMI output ports quantity	1

Weight and Dimensions

Depth	140 mm
Width	245 mm
Height	52 mm
Weight	1230 g