Cardinal 748P User Manual

17
Press ENTER to show the current settting. Press the 0 or
1 to enable or disable the continuous serial output on the
printer serial port. A NO selection enables print switch
operation. Then press ENTER to save it or to save the
current setting.
no = No Continuous Output YES = Continuous Output
If answered YES to Continuous Output, the display will prompt:
If SB-200A or SB-400A scoreboard is attached, answer
YES. If not, answer NO. NOTE: If older style SB-200
scoreboard is attached always answer NO.
Press ENTER to show the current settting. Press 0 to
disable or 1 to enable the Clear to Send (Printer Output
Handshake) for the printer output. This feature can be used
with printers that have small buffers to prevent data
overrun. Press ENTER to save it or to save the current
setting.
YES/NO to inhibit sending serial data during input. If yes,
all serial output will stop while weight is not being displayed
(i.e. while inputting id, tare, time, date, presets, bargraph or
displaying the current tare value). NOTE: YES required for
“Legal for Trade” applications.
Press ENTER and the display will show no. If you wish to
program or review the location of the printed data on the
ticket, press the 1 key to change the display to YES.
Otherwise leave the display at no and press the ENTER
key to bypass these settings. If YES, press the ENTER key
to continue the Printer Tab settings. If no, advance to
CALIBRATION “C”
NUMBERS or to CALdAC if the option board is installed (see CALIBRATION OF
THE ANALOG OUTPUT).
PRINTER PORT PARITY
PrtYP=
Press ENTER to show the current parity setting. Press 0
through 2 to enter the new parity setting for the printer
serial port. Then press ENTER to save it or to save the
current setting.
0 = No Parity 1 = Odd Parity 2 = Even Parity
Press ENTER to show the current number of data bits.
Press 7 or 8 to enter the new number of data bits for the
printer serial port. Then press ENTER to save it or to save
the current setting.
Press ENTER to show the current number of stop bits.
Press 1 or 2 to enter the new number of stop bits for the
printer serial port. Then press ENTER to save it or to save
the current setting.
PRINTER PORT DATA BITS
PRINTER PORT STOP BITS
StoPP=
bitSP=
i5nd
CONTINUOUS PRINTER OUTPUT
CLEAR TO SEND (Printer Output Handshake)
I
NHIBIT SERIAL DATA
PRINTER TAB SETTINGS
ContP=
CtS=
5b400?
tAbS?

Cardinal 748P Specifications

General

Brand	Cardinal
Model	748P
Category	Accessories
Language	English