178
USING AUDIO
Voice Recording lets you record audio only, without a snapshot
or movie.
Using built-in memory only, you get up to about 35 minutes of
Voice Recording.
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and
[X] to select “Voice
Recording” and then
press [SET].
This causes “ ” to appear
on the monitor screen.
3. Press the shutter button to start recording.
• The operation lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a marker into
the recording. During later playback, you will be able to
jump to the markers in the recording.
4. Press the shutter button again to stop audio
recording and return to the screen in step 3.
• Recording also will stop automatically if memory
becomes full.
5. Now you can repeat steps 3 and 4 to record
more, or you can exit this procedure by
pressing [BS] and selecting another BEST
SHOT scene.
When exiting this procedure, select “Auto” for normal image
recording.
Recording Audio Only (Voice
Recording)
Remaining Recording
Time
Recording Time
To Next Page
Loading...
Need help?
General
