45
GETTING READY
3. Use [S] and [T] to select the item you want to
configure (“Sleep” or “Auto Power Off”) and
then press [X].
4. Use [S] and [T] to select the sleep or Auto
Power Off trigger time and then press [SET].
Selecting “Off” for the sleep setting disables the sleep
feature.
NOT
• When both sleep and Auto Power Off have the same time
settings, Auto Power Off takes priority.
• Sleep and Auto Power Off are disabled under the following
conditions.
– When there is a connection between the camera and
computer or other device
–During Voice Recording playback or recording
–During movie recording and playback
You can store images you shoot with the camera on a memory
card. It is up to you to purchase a commercially available
memory card. In addition to memory card storage, the camera
also has built-in memory, which is enough to hold a few
snapshots or a short movie. Use built-in memory for test
purposes, emergency use, etc.
NOT
• Images can be copied between the camera’s built-in
memory and a memory card (page 185).
• The following data is stored in built-in memory. It cannot be
copied to a memory card.
– Face Recognition data saved with Record Family
– BEST SHOT mode user image information
– FAVORITE folder
– Mode memory settings
–Start-up screen image
Using a Memory Card
To Next Page
Loading...
Need help?
General
