65
SHOOTING A SNAPSHOT
Using the easy Mode
The easy mode eliminates troublesome setups. This mode is
recommended for those who are new to digital imaging.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the second option
from the bottom in the operation panel (easy
mode).
3. Use [W] and [X] to select “ ON” and then
press [SET].
This enters the easy mode.
4. Focus the image.
While the focus frame is aligned with the subject, half-press
the shutter button.
5. Shoot the image.
When the image is focused, press the shutter button the rest
of the way.
■ Using the easy Menu
The easy menu contains flash, self-timer, and image size
settings, plus an item for exiting the easy mode.
While the camera is in the easy mode, all the other settings
(besides Self-timer, Image Size, and easy Mode) on the REC
tab menu (page 246) and Quality tab menu (page 247) are fixed
at preset optimum values. Any settings you configured on these
tabs are not used in the easy mode.
IMPORTANT!
• To use the Set Up tab menu (page 248), you need to exit
the easy mode. To do this, select the “easy Mode” item in
step 2 of the following procedure, and then select in
step 3. After that, you can use the Setup tab menu as you
normally do.
To Next Page
Loading...
Need help?
General
