220
USING THE CAMERA WITH A COMPUTER
IMPORTANT!
• Never use your computer to modify, delete, move, or
rename any image files that are in the camera’s built-in
memory or memory card. Doing so can cause problems
with the camera’s image management data, which will
make it impossible to play back images on the camera and
can drastically alter remaining memory capacity. Whenever
you want to modify, delete, move, or rename an image, do
so only on images that are stored on your computer.
• Never unplug the USB cable or operate the camera while
viewing or storing images. Doing so can cause data to
become corrupted.
■ Disconnect the camera from the computer
Windows Vista/XP/98SE/98 Users
Press the camera’s [ON/OFF] button. After making sure that the
camera’s operation lamp is not lit green, disconnect the camera
from the computer.
Windows 2000/Me Users
Click card services in the task tray on your computer screen, and
disable the drive nu mber assigned to the camera. Next,
disconnect the USB cable from the camera, and then turn off the
camera.
To Next Page
Loading...
Need help?
General
