Casio fx-3650P User Manual

E-10
•Pressing the e or r key while a replay memory calculation is on the
display changes to the editing screen.
•Pressing the e or r key immediately after you finish a calculation
displays the editing screen for that calculation.
•Pressing t does not clear replay memory, so you can recall the last
calculation even after you press t.
•Replay memory capacity is 128 bytes for storage of both expressions and
results.
•Replay memory is cleared by any of the following actions.
When you press the 5 key
When you initialize modes and settings by pressing A B 2 (or 3) <
When you change from one calculation mode to another
When you turn off the calculator.
kError Locator
•Pressing r or e after an error occurs displays the calculation with the
cursor positioned at the location where the error occurred.
kExponential Display Formats
This calculator can display up to 10 digits. Larger values are automatically
displayed using exponential notation. In the case of decimal values, you can
select between two formats that determine at what point exponential
notation is used.
•To change the exponential display format, press the F key a number of
times until you reach the exponential display format setup screen shown
below.
•Press 3. On the format selection screen that appears, press 1 to select
Norm 1 or 2 for Norm 2.
1 2 3
Fix Sci N or m

Casio fx-3650P Specifications

General

Type	Scientific
Form factor	Pocket
Housing material	Plastic
Digits	12 digits
Digit comma separator	Yes
Display number of lines	2 lines
Digit comma separator format	Standard (3 digits)
Battery type	LR44
Number of batteries supported	1

Weight and Dimensions

Weight	100 g
Dimensions (WxDxH)	78 x 157 x 12 mm