Casio fx-3650P User Manual

E-36
Storing a Program
Use the following procedure to specify the Edit Prog Mode and store a
program in memory.
Edit Prog ............................................................................. F F F 1
•Example: To create a program that uses Heron’s formula to calculate the
area of a triangle based on the lengths of its three sides
Formula: S = s (s – A)(s – B)(s – C) Note that: s = .
1. Enter the Edit Prog Mode, which displays the screen shown below.
(A + B + C)
/2
2. Select the program number (P1 to P4) to which you want to assign the
program.
Ex.: 2 (Program P2)
P– 1234 308
Ed i t Pro
g
PRGM
If there is already a
program in memory, its
number appears on the
display.
Remaining capacity (bytes)
–
000
PRGM
Number of bytes used by program P2.
PRGM
3. Input the program.
Program
?→A: ?→B: ?→C: (A + B + C) ÷ 2→D^D × (D – A) × (D – B) × (D – C):
Ans
•To input a colon (:), press <.
•To input “→A”, press A j q.
•You can also input a variable name using the p key. To input “X” for
example, press p x.

Casio fx-3650P Specifications

General

Type	Scientific
Form factor	Pocket
Housing material	Plastic
Digits	12 digits
Digit comma separator	Yes
Display number of lines	2 lines
Digit comma separator format	Standard (3 digits)
Battery type	LR44
Number of batteries supported	1

Weight and Dimensions

Weight	100 g
Dimensions (WxDxH)	78 x 157 x 12 mm