Recording Performances
EN-111
You can record to one track while playing back a pre-recorded track of a MIDI recorder song.
• If you make a mistake while overdub recording, you can erase and re-record the overdubbed track.
For more information, see “Deleting a MIDI Recorder Song (Entire Song/Individual Tracks)” (page
EN-113).
1.
See “Playing Back MIDI Recorder Songs” (page EN-112) to select a pre-recorded
MIDI recorder song.
• Play the selected song to check the recording and the tracks that have already been recorded.
2.
Touch the 0REC button.
The 0REC button flashes red and the Digital Piano is ready to record.
3.
Touch and hold the 0REC button to display the “RECORD SETTING” screen.
4.
Trace the touch ring to set the “Rec Track” to “System” or “Solo”.
• Select “Solo” to record the solo track while playing the pre-recorded system track, or “System” to
record the system track while playing the pre-recorded solo track.
5.
Start and stop recording as shown in step 5 and after in “Recording with the MIDI
Recorder” (page EN-107).
Recording a Second Track Over the First (System Track + Solo Track)