Applying Effects
EN-52
The chorus effect thickens the sound.
This Digital Piano has a preset chorus effect assigned to each tone, but you can select a different type
by following the operation below.
1.
Select the “09 Favorite Piano” of the F button set. See “To change the F Button
Set” (page EN-32).
2.
Touch the F2 button (EFECT).
The “EFFECT” screen appears.
• Check that the cursor ( ) is on the “Chorus Type”.
3.
Change the value of the “Chorus Type” setting.
• Use the touch ring to change the desired setting value.
The mixer can be used to adjust the chorus applied to each part (Upper 1/Upper 2/Lower) separately.
For more information, see “Using the Mixer” (page EN-60).
Using Chorus (Chorus, Flanger, Short Delay)
Changing the Chorus Type
Setting value Description
Tone The chorus type is automatically set to match the selected tone.
Chorus 1 to 4 Four chorus types with different characteristics.
FB Chorus Chorus with feedback.
Deep Chorus Chorus with the deepest, thickest sound.
Flanger 1 to 4
Four types of flanger with different sound undulations and
fluctuations.
Short Delay 1, 2 Short delay. There are two types to choose from.
Adjusting the Depth of the Chorus Effect
To Next Page
Loading...
Need help?
General
