Changing the Sound During a Performance
EN-71
■ To change the Modulation settings
The settings shown in the table below, which appear in the “CONTROL” screen of “Selecting the
Function Assigned to the CONTROL Button” (page EN-69), can be used to change the settings when
modulation is assigned to the CONTROL button.
1.
Touch the FUNCTION button to display the FUNCTION menu.
2.
Use the touch ring to select “SOUND” > “PORTAMENTO” > “Portamento Time”.
3.
Use the touch ring to change the “Portamento Time” setting.
• This can be set between 000 and 127. The higher the value, the slower the pitch changes.
Setting item Values Description
Mod Value 000 to 127 Sets the intensity at which modulation is applied.
Mod Upper1 Part
Mod Upper2 Part
Mod Lower Part
On, Off
Selects whether to apply modulation to the
Upper 1/Upper 2/Lower parts (On) or not (Off).
Specifying the Portamento Time
To Next Page
Loading...
Need help?
General
