23
14.1.2 Master Balance
Format
Note 1:
For information about the relationship between setting values and send/receive values, see "25.7 Pan Setting Value
Table" in "Part VIII Setting Values and Send/Receive Values".
Send
This message is not sent when the Instrument is operated.
Receive
Receipt changes the Master Pan parameter. Note that the Master Pan parameter cannot be changed with an
Instrument operation.
14.1.3 Master Fine Tuning
Format
Note 1:
For information about the relationship between setting values and send/receive values, see "25.8 -99 - 0 - 99
Setting Value Table" in "Part VIII Setting Values and Send/Receive Values".
Send
Sent when Instrument's Fine Tune setting is changed.
Receive
Receipt changes the Master Fine Tune parameter.
Pedal Effect
When a pedal effect used by piano tones is selected, the fine tuning of the strings for which resonance is
simulated is also changed in accordance with the Master Fine Tune value. Because of this, receipt of this message
may cause the resonance interval to change temporarily.
14.1.4 Master Coarse Tuning
Format
Note 1:
For information about the relationship between setting values and send/receive values, see "25.5 -24 - 0 - 24
Setting Value Table" in "Part VIII Setting Values and Send/Receive Values".
Send
Sent when Transpose is changed.
Receive
Receipt changes Master Coarse Tune.
Message Format: F0H 7FH 7FH 04H 02H llH mmH F7H
ll: Value LSB (Note1)
mm: Value MSB (Note1)
Message Format: F0H 7FH 7FH 04H 03H 00H mmH F7H
mm: Value MSB (Note1)
Message Format: F0H 7FH 7FH 04H 04H llH mmH F7H
ll: Value LSB (Note1)
mm: Value MSB (Note1)
To Next Page
Loading...
Need help?
General
