7
1.4 Part Sub-blocks
The parts of the sound source can be operated and their settings can be changed with system exclusive messages
or channel messages. The following table shows the fixed relationships between the part numbers and channel
numbers of channel messages.
1.5 MIDI Send by Auto Accompaniment or Song Memory (PX-110/PX-310)
This document provides information about which operations are sent by each message. Note however, that auto
accompaniment and Song Memory auto accompaniment operations that include playback data can cause any MIDI
message to be sent, and so they are not included here.
Also note that auto accompaniment and Song Memory play data is sent only when the Accomp/Song MIDI Out
item is turned on.
2 Different Operations Depending on Part Mode
Each Part Mode (see 10.1 "About the Part Mode"), which is the sound source operational mode, has different
messages for performing operations upon receipt. Each message is explained in the applicable message sections of
this document.
Sound Source
Part
Receive MIDI
Channel
Assigned Function Description Remarks
01 01 Keyboard Normally used
02 02 Keyboard Used for Layer
03 03 Keyboard Used for Split Piano tune SMF left-hand data
04 04 - Piano tune SMF right-hand data
05 05 -
06 06 Accompaniment Chord1 PX-110/PX-310 only
07 07 Accompaniment Chord2 PX-110/PX-310 only
08 08 Accompaniment Chord3 PX-110/PX-310 only
09 09 Accompaniment Bass PX-110/PX-310 only
10 10 Accompaniment Drum PX-110/PX-310 only
11 11 Song Memory Track1 melody
12 12 Song Memory Track2
13 13 - -
14 14 - -
15 15 - -
16 16 - -
To Next Page
Loading...
Need help?
General
