8
Part II
Channel Message
3 Receive Channel
The channel number of the channel messaged received by each part is explained in the table in "1.4 Part Sub-
blocks".
The MIDI Channel of messages that can change effect settings is determined by the MIDI Channel, which is
described in the footnote titled "MIDI Channel Number" in section 8.7.
4 Send Channel
The MIDI channel of the channel message sent in a accordance with a play operation, tone, or other setting
operation is basically a value that corresponds to the part being played and the part being manipulated. Note,
however, this Instrument's keyboard main sent channel allocation can be change by a value set by the Keyboard
Channel.
5Note Off
Format
Send
Sent when something is played on the keyboard.
Receive
Received over MIDI channels that correspond to each part. The velocity value is ignored.
6Note On
Format
Send
Sent when something is played on the keyboard.
Receive
Received over MIDI channels that correspond to each part.
Message Format: 9nH kkH 00H
8nH kkH **H (receive only)
n: MIDI Channel Number
kk:
**:
Key Number
Ignored
Message Format: 9nH kkH vvH
n: MIDI Channel Number
kk: Key Number
vv: Velocity
To Next Page
Loading...
Need help?
General
