R-140
Registration
4-6-3. Using the set menu and pulldown group function
Before using the set menu and pulldown group function, the following programs are
necessary to use this function.
1) Programming set menu table (page 33 of the programming manual)
2) Programming pulldown group table (page 32 of the programming manual)
3) Allocate the pulldown menu key, if you want to use. (page 26 of the programming
manual)
4) Programming PLU “Set menu table linking” and “List Link No.” (page 88 of the
programming manual)
5) Programming item prices (page 140 of the programming manual)
1.Registering a PLU linked to a set menu and pulldown group.
2. Select the appropriate item and press the <YES> key.
If there are more pulldown groups linked to the PLU, next
pulldown group appears on the screen.
You can also select items directly by using the pulldown key.
4-6-4. Using the substitution key
Normally, you can select item(s) in a pulldown group. If the customer requires to take an
item from another set menu/pulldown group, the <SUBSTITUTION> key should be used.
1. A PLU linked to a pulldown group is registered, but no items
in the list can be selected.
REG
C
01 10-10-01 12:34 000001
1 PLU0001 •10.00
PLU0002
PLU0003
PLU0004
PLU0001 •10.00
1 •10.00
REG
C
01 10-10-01 12:34 000001
1 PLU0001 •10.00
PLU0002
PLU0003
PLU0004
1 PLU0010
PLU0001 •10.00
2 •11.00
}
Set Menu linked to PLU0001
← Selected in the LIST01
REG
C
01 10-10-01 12:34 000001
1 PLU0020 •10.00
1 PLU0021 •20.00
PLU0021 •10.00
2 •30.00
PLU0001
PLU0002, PLU0003, PLU0004
LIST01
↓
PLU0010
PLU0011
PLU0012
PLU0013
← Select one of these.
←
←
←
LIST01 0/3-1
PLU010 PLU011
PLU012 PLU013
LIST01 0/3-1
PLU001 PLU002
PLU003 PLU004
(List pop-up window)
(List pop-up window)
}
Set Menu linked to PLU0001