R-116
Manager Operation
3-5-3. Inline / online functions
3-5-3-1. Inline functions
The list below shows the main functions available with the QT-6600 system.
In case of these functions below are executed, the satellite terminal can receive these
commands even if the satellite terminal is in OFF mode.
1) X/Z data collection for each terminal
2) X/Z data consolidation for each terminal
3) X/Z data collection / consolidation for each terminal
4) Program data copy and upload between terminals (auto-program function)
Functions 1), 2) and 3) can only be performed from a terminal that is programmed as master
in which consolidation files are allocated.
3-5-3-2. Online functions
The QT-6600 can be controlled from the personal computer by connecting it to RS-232C
port 1 (COM1).
In case of sending a command from PC, the terminal can receive this command even if the
terminal is in OFF mode.
To Next Page
Loading...
Need help?
General
