Casio QT-6600 Reference Manual

R-87
QT-6600 Reference Manual
2-15. Magnetic card reading
QT-6600 has the following capability by swiping magnetic card.
• In case of setting “Swipe has precedence.” (D
1
of the address 24 of the general control program)
1. Customer number entry
You can enter customer number, by swiping magnetic card.
<CUST-#> key → Card swipe
• Customer number should be programmed in the customer file.
• Site No. in the mag stripe equals to the programmed value.
• Use Track-1
2. Create dummy check
Card swiping activates table transfer.
• Read the customer name from the magnetic card and store it to the check index memory.
• In case of using this feature, program “transfer table by card swiping” (D
10
of the
address 26 of the general control program)
• Use Track-1
3. Clerk sign on
Card swiping activates clerk sign on. (effective during signing off only)
• In case of using this feature, the lower 4 digit in the mag stripe should be set to the clerk
number.
• Use Track-2 (If track-2 cannot read, use track-1.)
4. Enter REG 2 mode
Cashier/ clerk can enter the REG 2 mode, by swiping card.
<MODE> key → <2> <REG MODE> key → Card swipe
• In case of using this feature, the lower 4 digit in the mag stripe is treated as secret
number.
• Use Track-2 (If track-2 cannot read, use track-1.)
• In case of setting “Swipe has NOT precedence.” (D
1
of the address 24 of the general control program)
5. Loyalty card
This function is used to register the key strings such as customer discount etc., by swiping
magnetic card (and scanning OBR code). After swiping a card (track-2)/ scanning a code, the
designated function in the transaction key file is executed.
Procedure
• Using swiping:
(<SWIPE> key)→ Card swipe Pressing <SWIPE> key is ommissible.
<SWIPE> key should be allocated in the transaction key file.
If there is no <SWIPE> key on the keyboard, program D
7
and D
6
of the address 24 of the genreral control program to designate the
default <SWIPE> key.
• Using scanning:
<SWIPE> key → Card scanning Pressing <SWIPE> key is mandatory.
After swiping/ scanning card, the following subjects are performed.
1. Check card expiry (In case of programming check to <SWIPE> key.)
2. Card data check (Checked by D
10
~ D
8
of <SWIPE> key program and unit price field of
<SWIPE> key.
3. Transfer card data (D
7
and D
6
of <SWIPE> key program)
4. Activate function (D
5
~ D
1
of <SWIPE> key program)

Casio QT-6600 Specifications

General

Brand	Casio
Model	QT-6600
Category	Touch terminals
Language	English