Casio XJ-V100W User Manual

39
Starting Projection of Files Located in Projector Internal
Memory
1. If a USB flash drive or some other USB device is connected to the projector’s
USB-A port, disconnect it.
2. Press the [INPUT] key. This will display the “Input” dialog box.
3. Use the [] and [] keys to select “Viewer” and then press the [ENTER] key.
4. On the dialog box that appears, confirm that “File Viewer” is selected and then
press the [ENTER] key.
 This will start up File Viewer and display the File Viewer main screen like the one shown below.
5. Depending on the type of file you want to project, perform one of the operations
below.
To project this type of file: Perform this operation:
Presentation Files “To project a presentation file” (page 45)
PDF Files “To project a PDF file” (page 46)
Image Files “To project an image file” (page 47)
Movie Files “To project a movie file” (page 47)

Casio XJ-V100W Specifications

General

Matrix size	0.65 \
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	35 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-30 -30 °
Offset	33 %
Throw ratio	1.32 - 1.93:1
Zoom capability	Yes
Focal length range	18.9 - 27.2 mm
Aperture range (F-F)	2.31 - 2.73
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington
Maximum analog resolution	1920 x 1200 pixels
USB 2.0 ports quantity	0
Password protection type	Power on
Card reader integrated	-
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.12 W
Power consumption (typical)	135 W
Remote control type	IR
Harmonized System (HS) code	85286200

Weight and Dimensions

Width	299 mm
Height	97 mm
Weight	3500 g