Casio XJ-V100W User Manual

52
Autorun lets you configure the projector for automatic projection of image files or a movie file located
in a special folder named “AUTORUNC”. When auto projection is performed depends on where the
“AUTORUNC” folder is located.
The settings shown below need to be configured before using Autorun.
 “Multimedia Settings 3 Autorun” (page 30): Enabled
 “Option Settings 2 3 Plug and Play” (page 29): On
Note
 Autorun projection of the still images or a movie file is in accordance with the current settings
configured on the “Viewer Setup” screen (page 50).
To auto project images files or a movie file from a USB flash
drive
1. Create a folder named “AUTORUNC” (all single-byte upper-case characters) in
the root directory of the USB flash drive.
2. Insert all of the image files or movie file you want to auto project into the folder
you created in step 1.
 If you want to auto project a movie file, place only one movie file into the “AUTORUNC” folder.
Do not place any other files into the folder. If there is both a movie file and image file in the
“AUTORUNC” folder, the image file will be given priority and the movie file will not be played.
 Multiple image files can be placed in the “AUTORUNC” folder without any problem. If there
are, plugging the USB flash drive into the projector in step 3 below will start a slideshow of the
images.
3. While projector power is turned on, plug the USB flash drive that contains the
“AUTORUNC” folder to which you copied the files in step 2 above into the
projector’s USB-A port.
 This will automatically start up File Viewer and project the file(s) you put in the “AUTORUNC”
folder in step 2 above.
Autorun
When AUTORUNC is located here: Autorun is performed at this time:
Internal memory When the projector is turned on while there is nothing
connected to its USB-A port.
USB flash drive When a USB flash drive is connected to the projector’s
USB-A port or when the projector is turned on while a
USB flash drive is connected to the USB-A port.

Casio XJ-V100W Specifications

General

Matrix size	0.65 \
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	35 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-30 -30 °
Offset	33 %
Throw ratio	1.32 - 1.93:1
Zoom capability	Yes
Focal length range	18.9 - 27.2 mm
Aperture range (F-F)	2.31 - 2.73
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington
Maximum analog resolution	1920 x 1200 pixels
USB 2.0 ports quantity	0
Password protection type	Power on
Card reader integrated	-
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.12 W
Power consumption (typical)	135 W
Remote control type	IR
Harmonized System (HS) code	85286200

Weight and Dimensions

Width	299 mm
Height	97 mm
Weight	3500 g