110
Modified Moisture/Fat
Fat Parameters
1. POWER: 0%
2. DELTA WEIGHT: 0.0 mg
3. DELTA TIME: 0 secs
4. MAX TIME: 10 mins
5. BIAS: ±0.00%
6. MIN RESULT: 0.00%
7. MAX RESULT: 100.00%
Press item number to select or
NEXT PAGE for more menu items.
MAIN PREV NEXT
MENU PAGE PAGE
Moisture/Fat
1. STANDARD
2. DILUTIONS
3. MODIFIED FAT
Press item number to select.
MAIN PREV
MENU PAGE
Modified Moisture/Fat
Moisture Parameters
1. POWER: 0%
2. DELTA WEIGHT: 0.0 mg
3. DELTA TIME: 0 secs
4. MAX TIME: 10 mins
5. BIAS: ±0.00%
6. MIN RESULT: 0.00%
7. MAX RESULT: 100.00%
Press item number to select or
NEXT PAGE for more menu items.
MAIN PREV NEXT
MENU PAGE PAGE
10. Press “3” to select “Modified Fat.”
Note: Press the operation key below PREV
PAGE to return to the moisture/fat mode screen.
11. Press the numbers (1 - 7 Constant Weight
or 1 - 5 Set Time) and enter the appropriate
method parameters.
Note: Refer to the QUICK TEST section of this
manual for instructions for entering method
parameters for Constant Weight and Set Time.
12. Press the operation key below NEXT
PAGE to access the fat method parameters
screen.
13. Press the numbers (1 - 7 Constant Weight
or 1 -5 Set Time) and enter the appropriate
method fat parameters.
C
O
N
S
T
A
N
T
W
E
I
G
H
T
S
E
T
T
I
M
E
C
O
N
S
T
A
N
T
W
E
I
G
H
T
Dilution Moisture/Fat
Moisture Parameters
1. POWER: 0%
2. DRY TIME: 00:00 min:sec
3. BIAS: ±0.00%
4. MIN RESULT: 0.00%
5. MAX RESULT: 100.00%
Press item number to select or
NEXT PAGE for more menu items.
MAIN PREV NEXT
MENU PAGE PAGE
To Next Page
Loading...
Need help?
General
