CEM SMART System 5 User Manual

153
Service and Repair
WARNING
The SMART System
5
utilizes high voltage and microwave radiation.
Instrument service and repair must be undertaken only by technicians
trained in the repair and maintenance of high voltage and microwave
power systems.
Mise en garde
Le SMART System
5
requiert une haute tension et produit une radiation
de micro-ondes. L’entretien et les réparations doivent être seulement fait
par un personnel formé en réparation et entretien de systèmes opérant
avec de haute tension et produisant de micro-ondes.
If damage to the SMART System
5
is detected, do not attempt further instrument
operation. Contact the CEM Service Department or the nearest subsidiary or
distributor.
CEM Limited, LLC
Service Department
P.O. Box 200
3100 Smith Farm Road
Matthews, NC 28104 -5044 USA
Within the continental United States
Telephone: (800) 726-5551
Fax: (704) 821-4368
Outside the United States
Telephone: (704) 821-7015
Fax: (704) 821-4368
Subsidiary Offices
CEM Ltd. CEM GmbH
2 Middle Slade Carl-Friedrich-Gauss-Str. 9
Buckingham Ind. Part 47454 Kamp-Lintfort
Buckingham MK18 1WA Germany
United Kingdom Tel: (49) 2842-96440
Tel: (44) 1-280-822873 Fax: (49) 2842-964411
Fax: (44) 1-280-822342
CEM S.r.l.
Via Dell’Artigianato, 6/8
24055 Cologno al Serio
Italy
Tel: (39) 35-896224
Fax: (39) 35-891661

CEM SMART System 5 Specifications

General

Brand	CEM
Model	SMART System 5
Category	Measuring Instruments
Language	English