CEM SMART System 5 User Manual

122
System Options
1. AUTOTRACK ID: ON
2. AUTO PRINT: RESULTS
3. AUTO START: OFF
4. EXTERNAL BALANCE: OTHER
5. LANGUAGE: ENGLISH
6. KEY BEEPER: ON
7. HEATER TEMP: 042
8. BAR GRAPH: ON
Input max temp, press ENTER.
Entry: 000
MAIN PREV NEXT
MENU PAGE PAGE
10. Using the numeric keys, enter the heater
temperature. Press ENTER.
The bar graph, which displays during a sample
analysis, is designed to provide a visual represen-
tation of the initial sample weight.
11. Press “8” to toggle the bar graph “On” or
“Off.”
12. Press the operation key below NEXT
PAGE to access additional system options.
Predry time is a set time for the instrument to
activate microwave energy, once the TARE key
is pressed, to dry the sample pads prior to taring
the weight of the pads.
13. Press “1” to select and enter a predry time.
14. Using the numeric keys, enter the preheat
time (0 - 60 seconds).
15. Press ENTER.
16. Press the operation key below prev page to
return to the System Options screen.
17. Press the operation key below PREV
PAGE to return to the Setup screen.
18. Press “2” to activate the System
Information screen.
System Options
1. PREDRY: 00
Input time, press ENTER.
Entry: 00
MAIN PREV
MENU PAGE
System Options
1. AUTOTRACK ID: ON
2. AUTO PRINT: RESULTS
3. AUTO START: OFF
4. EXTERNAL BALANCE: OTHER
5. LANGUAGE: ENGLISH
6. KEY BEEPER: ON
7. HEATER TEMP: 042
8. BAR GRAPH: ON
Input max temp, press ENTER.
Entry: 000
MAIN PREV NEXT
MENU PAGE PAGE
Setup
1. SYSTEM OPTIONS
2. SYSTEM INFORMATION
3. PRINTER
4. COM PORT
5. CONTRAST
6. CLOCK
7. CALIBRATION
8. SECURITY
Press item number to select.
NEXT
PAGE

CEM SMART System 5 Specifications

General

Brand	CEM
Model	SMART System 5
Category	Measuring Instruments
Language	English