Cisco 11503 - CSS Content Services Switch User Manual

Appendix B Using the Offline Diagnostic Monitor Menu
B-2
Cisco Content Services Switch Administration Guide
OL-5647-02
This appendix contains the following major sections:
• Accessing the Offline DM Main Menu
• Using the Boot Configuration Menu
• Displaying the Boot Configuration
• Using the Advanced Options
Accessing the Offline DM Main Menu
To access the Offline DM Main menu:
1. Connect a console to the console port on the CSS. Configure the console with
the following default values: 9600 baud, no parity, 8 data bits, 1 stop bit, and
flow control set to none.
2. If accessing the Offline DM Main menu from a terminal server, configure the
client application to display 24 lines to enable the Offline DM Main menu to
display properly.
3. Power on the CSS. After the CSS begins to boot (approximately 15 seconds),
it displays the following message (for approximately 5 seconds):
Would you like to access the Offline Diagnostic Monitor
menu?(y<cr>)
At this point in the boot sequence, you may either:
• Take no action (or press n) and let the CSS continue booting
automatically with the default boot configuration.
• Press y, then press Enter to halt the boot process and display the Offline
DM Main menu.
The Offline DM Main menu appears:
MAIN MENU
Enter a menu number:
1* Set Boot Configuration
2. Show Boot Configuration
3* Advanced Options
4. Reboot System
An asterisk (*) next to a menu option indicates that the option contains a submenu.

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English