Cisco 11503 - CSS Content Services Switch User Manual

B-11
Cisco Content Services Switch Administration Guide
OL-5647-02
Appendix B Using the Offline Diagnostic Monitor Menu
3. Press r to display the Offline DM Main menu.
4. Select option 4 to reboot the CSS. Upon reboot, the CSS uses the secondary
boot record.
Setting Secondary Boot Configuration
The information you provide for the secondary boot configuration specifies the
location from which the CSS accesses the boot image if you specified Clear as a
primary boot record or if the primary boot record fails.
When you select Set Secondary Boot Configuration from the Boot
Configuration menu, the CSS displays the following information. If you have
previously entered information, the CSS displays the existing information and
default values in square brackets [ ].
Configuring SECONDARY Boot Record
Boot via [N]etwork, [F]TP, [D]isk, or [C]lear: [D]
Press <Enter> to continue...
• Boot via Network - Allows you to boot the CSS using FTP from CSS software
on a network-mounted file system on a remote system
• Boot via FTP - Allows you to download an ADI file containing CSS software
that you want to install on the CSS disk
• Boot via Disk - Allows you to boot the CSS from software currently on the
CSS disk
• Boot via Clear - Instructs the CSS to boot the CSS from the primary boot
record
This section includes the following topics:
• Specifying a Network-Mounted File System as the Secondary Boot Record
• Specifying FTP as the Secondary Boot Record
• Specifying Disk as the Secondary Boot Record
• Specifying Clear as the Secondary Boot Record

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English