EasyManuals Logo
Home>Cisco>Network Router>3900 series

Cisco 3900 series User Manual

Cisco 3900 series
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
3-3
Cisco 2900 and 3900 Series Hardware Installation
OL-18712-01
Chapter 3 Installing and Connecting the Router
What you Need to Know
What you Need to Know
CLI Console Access
Use the new USB console port on the router to access the Cisco Internet Operating System (IOS) CLI
on the router and perform configuration tasks. A terminal emulation program, such as Microsoft
Windows HyperTerminal, is required to establish communication between the router and a PC. See the
“Connecting to a Console Terminal or Modem” section on page 3-30 for instructions.
Note A Microsoft Windows USB driver must be installed before you establish physical connectivity
between the router and the PC.
Slot and Port Numbers
Cisco 2900 series and 3900 series ISRs have built in ports and new slots. The new slots accommodate
new modules and interface cards; Enhanced High-Speed WAN Interface Cards (EHWICs), Internal
Services Modules (ISMs), Packet Voice Data Modules (PVDM3), and Service Modules (SMs). See the
“Slot, Port, and Interface Information” section on page 1-28 for slot and port numbering.
Software Licenses
To use the following features on Cisco Integrated Services Routers, you must purchase a software
package.
Gatekeeper
IPS (subscription)
SSL_VPN (counted)
SNA Switching
See the “Getting Software Licenses for the Router” section on page 6-1 for more information.
Before you Begin
Before installing and connecting a Cisco Integrated Services Router, read the safety warnings and gather
the following tools and equipment.
ESD-preventive cord and wrist strap
Number 2 Phillips screwdriver
Flat-blade screwdrivers: small, 3/16-in. (4 to 5 mm) and medium, 1/4-in. (6 to 7 mm)
To install or remove modules
To remove the cover, if you are upgrading memory or other components
Screws that fit your rack
Wire crimper
Wire for connecting the chassis to an earth ground:
AWG 6 (13 mm
2
) wire for NEBS-compliant chassis grounding
AWG 14 (2 mm
2
) or larger wire for NEC-compliant chassis grounding
AWG 18 (1 mm
2
) or larger wire for EN/IEC 60950-compliant chassis grounding

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3900 series and is the answer not in the manual?

Cisco 3900 series Specifications

General IconGeneral
BrandCisco
Model3900 series
CategoryNetwork Router
LanguageEnglish

Related product manuals