Cisco 7962G User Manual

An Overview of Your Phone
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 11
If your phone is inactive (idle) at the sleep time, you see a message to remind you that your phone is
going to power down. To keep the phone active, press any key on the phone. If you do not press any
key, your phone powers down.
If your phone is active (for example, on a call), your phone waits until it has been inactive for a period
of time before informing you of the pending power shutdown. Before the shutdown happens, you see
a message to remind you that your phone is going to power down.
At the scheduled time, your phone powers up. To wake up the phone before the schedule time, contact
your administrator.
Wake and sleep times are also linked to the configured days that you normally work. If your
requirements change (for example, your work hours or work days change), see your system
administrator to have your phone reconfigured.
For more information about EnergyWise and your phone, see your system administrator.

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g