Cisco 7962G User Manual

Basic Call Handling
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 15
Using Join
Join allows you to combine two or more existing calls to create a conference in which you are
a participant.
Tips
• If you frequently join more than two parties into a single conference, you may find it useful to first
select the calls that you want to join together, then press Join to complete the action.
• When Join completes, caller ID changes to “Conference.”
• You may be able to combine multiple conference calls by using the Join or DirTrfr softkeys. Check
with your system administrator to see if this feature is available to you.
• A Call Chaperone user can conference only the first caller. Subsequent callers can be conferenced
by the other participants in the conference.
If you want to... Then...
Create a conference by
joining together existing
calls that are on a single
phone line
1. From an active call, highlight another call that you want to include
in the conference and press Select.
Selected calls display this icon .
2. Repeat this step for each call that you want to add.
3. Press Join. You may need to press the more softkey to see Join.
Create a conference by
joining together existing
calls that are on multiple
phone lines
1. From an active call, press Join. You may need to press the more
softkey to see Join.
2. Press the green flashing line button for the calls that you want
to include in the conference.
One of the following occurs:
• The calls are joined.
• A window opens on your phone screen prompting you to select the
calls that you want to join. Highlight the calls and press Select, then
press Join to complete the action.
Note
If your phone does not support Join for calls on multiple lines,
transfer the calls to a single line before using Join.
See a list of participants or
remove participants
Press ConfList or Conference List. You may need to press the more
softkey first. See Viewing or Removing Conference Participants,
page 17.

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g