EasyManuals Logo
Home>Cisco>IP Phone>7962G

Cisco 7962G User Manual

Cisco 7962G
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
Advanced Call Handling
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 13
Using Cisco Extension Mobility
Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your
own. Once you log in to EM, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your system administrator must configure EM for you.
The Extension Mobility ChangePIN feature allows you to change your PIN from your Cisco Unified
IP Phone.
Tips
EM automatically logs you out after a certain amount of time. Your system administrator
establishes this time limit.
If you want to... Then...
Log in to EM 1. Choose > EM Service (name can vary).
2. Enter your user ID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log out of EM 1. Choose > EM Service (name can vary).
2. When prompted to log out, press Yes.
Change your PIN
using the Change
Credentials
service
1. Choose > Change Credentials.
2. Enter your User ID in the User ID field.
3. Enter your PIN in the Current PIN field.
4. Enter your new PIN in the New PIN field.
5. Enter your new PIN again in the Confirm PIN field.
6. Press Change.
You will see a PIN Change Successful message.
7. Press Exit.
Change your PIN
using the
ChangePIN
softkey
1. Choose > EM Service.
2. Press ChangePIN.
3. Enter your PIN in the Current PIN field.
4. Enter your new PIN in the New PIN field.
5. Enter your new PIN again in the Confirm PIN field.
6. Press Change.
You see the PIN Change Successful message.
7. Press Exit.

Table of Contents

Other manuals for Cisco 7962G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7962G and is the answer not in the manual?

Cisco 7962G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Case materialABS
Product colorBlack, Grey
Wall mountableYes
BluetoothNo
Security algorithms128-bit AES, 802.1x RADIUS
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Ethernet LAN (RJ-45) ports2
Voice codecsG.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume controlDigital
Display diagonal5 \
Display resolution320 x 222 pixels
Display number of colorsMonochrome
Caller ID-
Lines quantity- lines
Phonebook capacity- entries
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth203.2 mm
Width266.7 mm
Height152.4 mm
Weight1600 g

Related product manuals