Configuring Modular QoS Congestion Management on Cisco ASR 9000 Series Routers
Configuration Examples for Configuring QoS Congestion Management on Cisco ASR 9000 Series Routers
QC-69
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
OL-23108-02
Traffic Policing for a Bundled Interface: Example
The following example shows how to configure a policy map for a bundled interface:
policy-map p2
class voip
police rate percent 20
commit
RP/0/RSP0/CPU0:Jun 8 16:51:51.679 : config[65546]: %MGBL-LIBTARCFG-6-COMMIT :
Configuration committed by user 'cisco'. Use 'show configuration commit changes
1000006135' to view the changes.
exit
exit
interface bundle-ether 1
service-policy input p2
commit
RP/0/RSP0/CPU0:Jun 8 16:52:02.650 : config[65546]: %MGBL-LIBTARCFG-6-COMMIT :
Configuration committed by user 'cisco'. Use 'show configuration commit changes
1000006136' to view the changes.
The following example shows the display output for the successful policy map configuration in which
policing was configured in percentage:
RP/0/RSP0/CPU0:router# show policy-map interface bundle-ether 1
Bundle-ether1 input: p2
Class voip
Classification statistics (packets/bytes) (rate - kbps)
Matched : 0/0 0
Policing statistics (packets/bytes) (rate - kbps)
Policed(conform) : 0/0 0
Policed(exceed) : 0/0 0
Policed(violate) : 0/0 0
Policed and dropped : 0/0
Class default
Classification statistics (packets/bytes) (rate - kbps)
Matched : 0/0 0
Transmitted : 0/0 0
Total Dropped : 0/0 0
Queueing statistics
Vital (packets) : 0
Queueing statistics
Queue ID : 36
High watermark (packets) : 0
Inst-queue-len (bytes) : 0
Avg-queue-len (bytes) : 0
TailDrop Threshold(bytes) : 239616000
Taildropped(packets/bytes) : 0/0
Hierarchical Policing: Example
The following configuration is an example of typical hierarchical policing:
policy-map parent
class class-default
police rate 10 mbps
service-policy child
!
policy-map child
class class-default
To Next Page
Loading...
Need help?
General
