In addition, show configuration bulkstats brief displays the bulkstats configuration at a global scope, as
well as all server configuration. It does not display the schema configuration.
Verifying Your Configuration
After configuring support for bulk statistics on the system, you can check your settings prior to saving them.
Follow the instructions in this section to verify your bulk statistic settings. These instructions assume that you
are at the root prompt for the Exec mode.
Check your collection server communication and schema settings by entering the following Exec mode
command:
show bulkstats schemas
The following is an example command output:
Bulk Statistics Server Configuration:
Server State: Enabled
File Limit: 6000 KB
Sample Interval: 15 minutes (0D 0H 15M)
Transfer Interval: 480 minutes (0D 0H 15M)
Collection Mode: Cumulative
Receiver Mode: Secondary-on-failure
Local File Storage: None
Bulk Statistics Server Statistics:
Records awaiting transmission: 114
Bytes awaiting transmission: 8092
Total records collected: 59926
Total bytes collected: 4190178
Total records transmitted: 59812
Total bytes transmitted: 4188512
Total records discarded: 0
Total bytes discarded: 0
Last collection time required: 2 second(s)
Last transfer time required: 0 second(s)
Last successful transfer: Wednesday December 7 12:14:30 EDT 2011
Last successful tx recs: 190
Last successful tx bytes: 13507
Last attempted transfer: Wednesday December 7 12:14:30 EDT 2011
File 1
Remote File Format: /users/ems/server/data/chicago/bulkstat%date%%time%.txt
File Header: "CHI_test %time%"
File Footer: ""
Bulkstats Receivers:
Primary: 192.168.0.100 using FTP with username administrator
Records awaiting transmission: 0
Bytes awaiting transmission: 0
Total records collected: 0
Total bytes collected: 0
Total records transmitted: 0
Total bytes transmitted: 0
Total records discarded: 0
Total bytes discarded: 0
Last transfer time required: 0 second(s)
No successful data transfers
No attempted data transfe
File 2 not configured
File 3 not configured
File 4 not configured
ASR 5500 System Administration Guide, StarOS Release 21.4
159
Bulk Statistics
Verifying Your Configuration