Veritas Cluster Installation and Management
▀ Configuring Storage Array
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
Step 17 Click Close.
Step 18 Double-click the server in the main dialog. Refer to the following figure for details.
Step 19 Double-click the array in the main dialog. Refer to the following figure for details.
Step 20 Select the array, and click Standard Configure on the Configuration menu.
Step 21 Enter the password for the ssconfig user that you selected earlier.
Step 22 Select RAID 5, then select Use a standby drive, and Write a new label to the new LD check boxes.