Cisco ASR 5000 Series Installation And Administration Guide

L-ESS Installation and Configuration
Installing L-ESS Application in Stand-alone Mode ▀
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
OL-22979-03
53
Parameter
Description
Default Value
Hostname for
subdirectory
Type the host name of subdirectory created at source side. This configuration is
applicable only for local source. In case of remote source, remote host name is
used to create directory.
Null
Filter
Type the unique string that is used to identify the xDR files to be included or
excluded based on filter list. If the filter string is provided, L-ESS will pull/push
files only with matching filter string.
For example, the include filter list can be [MIP,OCS] and the exclude filter list
can be ![ACR,NBR].
Null
Add destination
for current
source
Select this option if you want to add destination to the currently configured
source.
Null
Detach
destination for
current source
Select this option if you want to remove destination from the currently
configured source.
Null
Destination Configuration
Destination
Location
Select (L)ocal or (R)emote depending on the location of destination.
Local
Destination
directory
Type the destination directory path at the destination side where xDR files are to
be stored. In cluster mode installation, this path should be shared path.
Null
Create
subdirectory with
hostname
Type (Y)es if you want to create subdirectory with host name under destination
base path.
y
Create subdir
under hostname
dir
Type (Y)es if you want to create subdirectory under the host name directory if it
exists.
y
Subdirectory
name
Type the name of the subdirectory being created.
data
How should
files be sent to
destination?
Compressed/Dec
ompressed
Type (Y)es if file is required in compressed format at the destination side.
If you type (Y)es, the file will be compressed (if it is not previously compressed)
and then forwarded. If you type (N)o, the file will be uncompressed (if
previously compressed) and then forwarded to destination.
c
Filter string
Type the unique string that is used to identify the xDR files to be included or
excluded based on filter list. If the filter string is provided, L-ESS will pull/push
files only with matching filter string.
For example, the include filter list can be [MIP,OCS] and the exclude filter list
can be ![ACR,NBR].
Null
File prefix while
transfer
Type the file prefix to be used while transferring the xDR files to the destination.
Null
Miscellaneous Configuration
Start disk clean
up based on
threshold
To enable the disk cleanup based on the disk utilization threshold level, type
(Y)es. This causes the deletion of older files on disk crossing the threshold of the
Disk threshold 2 parameter until disk utilization drops below Disk threshold 1.
y

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English