2-35
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
EXPRESS_SETUP Messages
EXPRESS_SETUP Messages
Note For Express Setup with the Ethernet management port, see the CLS_ACC Messages section.
Error Message EXPRESS_SETUP-3-UNABLE_TO_RESET_CONFIG: [chars].
Explanation The system cannot reset the configuration. [chars] is a text string that explains why the
reset failed. For example,
error renaming config file, error removing config file, or error
removing private config file
.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7.
Error Message EXPRESS_SETUP-6-CONFIG_IS_RESET: [chars].
Explanation The configuration is reset. [chars] is a text message that clarifies the reset event, such
as
The configuration is reset and the system will now reboot.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7.
Error Message EXPRESS_SETUP-6-MODE_ENTERED.
Explanation The Express Setup mode is active.
Recommended Action No action is required.
Error Message EXPRESS_SETUP-6-MODE_EXITED.
Explanation The Express Setup mode is no longer active.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General