Cisco CDE 220 Series User Manual

A-1
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
APPENDIX
A
Technical Specifications
This appendix provides the technical specifications and management information for the CDE205,
CDE220, CDE280, CDE285, CDE420, CDE460, and CDE475.
This appendix contains the following sections:
• CDE205 Specifications, page A-1
• CDE220 Specifications, page A-2
• CDE280 Specifications, page A-3
• CDE285 Specifications, page A-4
• CDE420 Specifications, page A-5
• CDE460 Specifications, page A-6
• CDE475 Specifications, page A-7
• CDE Management, page A-7
• CDE Management, page A-7
• CDE Heat Rate Load, page A-8
CDE205 Specifications
Table A-1 lists the technical specifications and management information for the CDE205.
Table A-1 CDE205 Specifications
Rack Units 2
Power 100 to 240 VAC or –48 VDC single power supply; optional
redundant power supply available
AC Power Rating 800 W peak
DC Power Rating 710 W peak
AC Electrical Input
• AC input voltage low range—Minimum: 100 VAC,
Maximum:127 VAC
• AC input voltage high range—Minimum: 200 VAC,
Maximum: 240 VAC
See the “If AC Power Supplies Are Installed” section on page 2-9.

Cisco CDE 220 Series Specifications

General

Brand	Cisco
Model	CDE 220 Series
Category	Server
Language	English