Cisco CRS Command Reference Guide

end-class-map
To end the configuration of match criteria for the class and to exit class map configuration mode, use the
end-class-map command in class map configuration mode.
end-class-map
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
Class map configuration
Command History
ModificationRelease
This command was introduced.Release 3.6.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeqos
Examples
The following example shows how to end the class map configuration and exit class map configuration mode:
RP/0/RP0/CPU0:router(config)# class-map class101
RP/0/RP0/CPU0:router(config-cmap)# match access-group ipv4 101
RP/0/RP0/CPU0:router(config-cmap)# end-class-map
RP/0/RP0/CPU0:router(config)#
Related Commands
DescriptionCommand
Defines a traffic class and the associated rules that match packets
to the class.
class-map, on page 12
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
20 OL-23235-03
Quality of Service Commands on the Cisco IOS XR Software
end-class-map

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English