Cisco CRS Command Reference Guide

match atm
To enable packet matching on the basis of the ATM operations, administration, and maintenance (OAM) or
cell loss priority (CLP), use the match atm command in class-map configuration mode. To disable packet
matching, use the no form of this command.
match atm {clp [ clp-bit-value ]| oam}
no match atm {clp [ clp-bit-value ]| oam}
Syntax Description
Configures the ATM CLP bit to be matched. Use either 0 or 1 for clp-bit-value
.
clp
(Optional) Value for the ATM CLP bit. Choose either 0 or 1 as the bit value. If
you do not specify a bit value, the default value of 1 is used.
clp-bit-value
Configures the ATM OAM to be matched.oam
Command Default
Packets are not matched on the basis of the ATM CLP or OAM.
Command Modes
Class map configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
The clp-bit-value argument was added.
Release 3.8.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The match atm command is supported on policy maps that are attached to ATM main interfaces, ATM
subinterfaces, or ATM permanent virtual circuits (PVCs). However, policy maps (containing the match atm
command) that are attached to these types of ATM interfaces can be input policy maps only.
The match atmcommand can be configured for ingress service policies only.
Task ID
OperationsTask ID
read, writeqos
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
34 OL-23235-03
Quality of Service Commands on the Cisco IOS XR Software
match atm

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English