Cisco CSR 1000v Series User Manual

Click Next.
Step 4
In the Name field, enter the name of the VM.
Step 5
When prompted for the installation media, choose from one of the following:
•
Install from the ISO library or DVD drive
•
Boot from network
Click Next.
Step 6
Select the server where the VM will be placed.
Select the checkbox for Place the VM on the server. Click Next.
Step 7
Enter the number of vCPUs and memory settings.
See Installation Requirements for Citrix XenServer: Cisco IOS XE Everest 16.4, on page 109 or other "Installation
Requirements" sections, for the supported number of vCPUs and memory requirements for your release.
Click Next.
Step 8
Add the virtual disks by inputting the following fields:
•
Enter the description (optional).
•
Select the virtual disk size from the pull-down menu.
See Installation Requirements for Citrix XenServer: Cisco IOS XE Everest 16.4, on page 109 or other "Installation
Requirements" sections, for the supported number of vCPUs and memory requirements for your release.
•
Enter the location of the virtual disk.
Click Add and then click Next.
Step 9
On the Networking screen, select the networks that will connect to the Cisco CSR 1000v through the vNICs.
See Installation Requirements for Citrix XenServer: Cisco IOS XE Everest 16.4, on page 109 or other "Installation
Requirements" sections, for the supported number of vCPUs and memory requirements for your release.
a) Select a network and click Add Network.
b) Select External and click Next.
c) Type in the network name. Click Next.
d) Select the NIC to use, the VLAN, and set the MTU value.
Step 10
Click Finish.
The new network is added. Repeat the procedure in the previous step for each vNIC.
For more information about booting the VM, see the documentation at: http://www.citrix.com/. When the VM is booted,
the Cisco CSR 1000v begins the first-time boot process. See Booting the Cisco CSR 1000v and Accessing the Console,
on page 145 to continue the boot process.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
108
Installing the Cisco CSR 1000v in Citrix XenServer Environments
Manually Creating the Cisco CSR 1000v VM Using the .iso File (Citrix XenServer)

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English