Cisco CSR 1000v Series User Manual

Troubleshooting CSL License Issues
Determining the License Status
You can install multiple licenses on a Cisco CSR 1000v. To determine if a license is active, enter the show
license or show license detail command. The display indicates the license status. The following are the
possible states for license:
•
Active, In Use
This state indicates that the license is active and is in use by the Cisco CSR 1000v.
•
Active, Not in Use
This state indicates that the license is installed on the Cisco CSR 1000v, but is not currently being used.
•
Inactive
This state indicates that the license is installed on the Cisco CSR 1000v but is no longer valid. For
example, a license that has reached the end of the subscription term is shown as inactive.
The following example shows a Cisco CSR 1000v with two licenses installed, an AX technology license and
a Security technology license:
router# show license detail
Index: 1 Feature: ax_1G Version: 1.0 License Type:
Paid Subscription Start Date: N/A, End Date: Nov 10 2014 License
State: Active, In Use License Count: Non-Counted License Priority: Medium
Store Index: 0 Store Name: Primary License StorageIndex: 2 Feature:
sec_1G Version: 1.0 License Type: Permanent License
State: Active, Not in Use License Count: Non-Counted License Priority: Medium
Store Index: 1 Store Name: Primary License Storage
The AX technology license is shown as Active and in use, while the Security technology license is Active
but not in use. To use the Security technology license, the license boot level command needs to be configured
to “security” and the Cisco CSR 1000v must then be reloaded.
The following example of the show version command shows that the Cisco CSR 1000v has an AX technology
license installed, but that the license boot level command has been set to “security”, but the Cisco CSR 1000v
has not yet been reloaded.
router# show version | inc Level
License Level: ax Next reload license Level: security
Migrating Technology Package Licenses to Cisco IOS XE 3.13S
Beginning with Cisco IOS XE 3.13S, the names of the technology package licenses have changed. The base
feature content is the same, but the names as shown in the licenses and displays have changed.
•
The Standard technology package was changed to the IPBase technology package.
•
The Advanced technology package was changed to the Security technology package.
•
The Premium technology package was changed to the AX package.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
170
Installing Cisco CSR 1000v Licenses
Troubleshooting CSL License Issues

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English